Skip to content

Operator task guide

vLLM-Omni, NVFP4 and KV-cache quantization (TurboQuant) memory triage

Multimodal serving in vLLM-Omni adds image, audio, and video encoder buffers plus multimodal token embeddings on top of static LLM weights and paged KV-cache blocks.

NVFP4 on Blackwell (sm_100) and aggressive KV-cache compression methods like TurboQuant or FP8 reduce weight and KV footprints sharply, so remaining OOMs usually stem from encoder profiling spikes, un-tuned gpu_memory_utilization, or missing kernel support.

Reviewed . Reference guidance is not a diagnosis of your workload.

Step-by-step method

  1. 1

    Separate encoder peak memory from paged KV-cache reservation

    Capture startup free VRAM alongside the multimodal profiler run so you can see whether OOM occurs during vision/audio encoder warmup or long-context KV allocation.

    nvidia-smi --query-gpu=index,memory.used,memory.free,memory.total --format=csv
    python -c "import torch; print(torch.cuda.get_device_capability(0))"
  2. 2

    Verify NVFP4 and FP8 kernel backend compatibility

    Confirm whether your GPU architecture natively accelerates FP4 block scaling (Blackwell B200 sm_100) versus falling back to software dequantization into BF16 buffers.

    rg -n -i 'nvfp4|fp8|kv_cache|Free memory on device|EngineCore' vllm-server.log
  3. 3

    Tune KV-cache dtype, max-model-len, and multimodal media limits

    Right-size max-num-batched-tokens and limit multimodal items per prompt before lowering gpu_memory_utilization blindly.

Quantized and multimodal vLLM OOM decision matrix

Signals, meanings and actions for vllm-omni, nvfp4 and kv-cache quantization (turboquant) memory triage.
SignalWhat it meansNext action
Startup OOM during encoder warmup in vLLM-OmniVision/audio encoder temporary activations exceed unreserved VRAM headroomLower --limit-mm-per-prompt or leave headroom in --gpu-memory-utilization (for example 0.85 to 0.88).
NVFP4 weight load uses double expected VRAMNon-Blackwell GPU fell back to BF16/FP8 weight dequantization or un-fused buffersVerify sm_100 compute capability and check quantization config kernels before benchmarking.
TurboQuant or FP8 KV-cache still hits cache block exhaustionmax_model_len exceeds remaining HBM at configured batch concurrencyCompute exact capacity in /tools/vram-calculator and lower --max-num-seqs or --max-model-len.

Evidence checklist

  • Full vLLM startup memory breakdown (weights, activations, KV blocks)
  • Exact quantization method (NVFP4, FP8, INT4, KV-cache dtype)
  • GPU model and compute capability (H100 sm_90 vs B200 sm_100 vs RTX 5090)
  • Multimodal input shapes (image resolution, audio length, frames)

Common mistakes

Sizing multimodal pipelines using text-only parameter math

High-resolution vision encoders and stacked image tokens expand activation peaks even when quantized LLM weights are small.

Assuming NVFP4 runs natively without Blackwell tensor cores

Using NVFP4 checkpoints on Hopper or Ampere hardware without native FP4 instructions can silently inflate latency or memory.

Frequently asked questions

Why does vLLM-Omni run out of memory even with quantized 4B or 12B weights?

Multimodal models allocate temporary activation buffers for vision and audio towers alongside long visual token sequences during vLLM warmup profiling. Tightening media limits per prompt and reserving ~12% headroom avoids encoder OOMs.

Does KV-cache quantization like FP8 or TurboQuant remove the need for tensor parallelism?

Compressed KV caches shrink context memory dramatically per concurrent sequence, allowing higher batch sizes on a single GPU, but total model weight size and HBM bandwidth still determine when Tensor Parallelism is required.

Apply the method to your incident

Use the three free diagnoses to review your error and relevant evidence. Keep reference guidance separate from the cause and recovery status of your own workload.

Diagnose your incident